Find Used 950GC 950H Wheel Loader, Second Hand 950GC Wheel Loader, Cheaper Price 950GC on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
| Payment Type: | L/C,T/T,Western Union |
|---|---|
| Incoterm: | FOB,CFR,CIF,FCA |
| Min. Order: | 1 Set/Sets |
| Delivery Time: | 40 Days |
Model No.: Cat 950GC
2019 Brand New CAT 5 ton front-end shovel CAT 950GC Wheel Loader similar 5 ton wheel loader in Stock
Cat Brand 950GC Wheel Loader with 2.5-4.4m3 Bucket
Application
You dig faster with the Cat 950 GC wheel loaders, thanks to Performance Series buckets with greater fill factors.
Specifications of Cat 950GC wheel loader in stock
| Net Power - ISO 9249 | 151.0 kW |
| Engine Model | Cat? C7.1 |
| Bore | 105.0 mm |
| Stroke | 135.0 mm |
| Displacement | 7.01 l |
| Maximum Gross Power - 2,000 rpm - ISO 14396 | 171.0 kW |
| Maximum Gross Torque - 1,400 rpm | 1020.0 N·m |
| Maximum Net Torque - 1,300 rpm | 931.0 N·m |
| Rated Gross Power - 2,200 rpm - ISO 14396 | 168.0 kW |
| Rated Net Power - 2,200 rpm - ISO 9249 | 151.0 kW |
| Operating Weight | 18676.0 kg |
| Bucket Capacities | 2.5 m3 to 4.4 m3 (3.3 yd3 to 5.75 yd3) |
| Breakout Force | 147.0 kN |
| Note (1) | **Compliance to ISO (2007) 14397-1 Sections 1 thru 5. |
| Note (2) | *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 40° Turn - ISO 14397-1* | 10503.0 kg |
| Static Tipping Load - Full 40° Turn - Rigid Tires** | 11197.0 kg |
| Forward - 1 | 7.0 km/h |
| Forward - 2 | 12.5 km/h |
| Forward - 3 | 22.0 km/h |
| Forward - 4 | 34.0 km/h |
| Reverse - 1 | 7.0 km/h |
| Reverse - 2 | 12.5 km/h |
| Reverse - 3 | 22.0 km/h |
| Steering System - Pump Type | Piston |
| Hydraulic Cycle Time - Dump, at Maximum Raise | 1.2 s |
| Hydraulic Cycle Time - Lower, Empty, Float Down | 2.8 s |
| Hydraulic Cycle Time - Raise from Carry Position | 6.1 s |
| Hydraulic Cycle Time - Total Cycle Time | 10.1 s |
| Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min) | 27900.0 kPa |
| Implement System - Maximum Pump Output at 2,200 rpm | 248.0 l/min |
| Implement System - Optional 3rd Function Maximum Flow | 280.0 l/min |
| Implement System - Optional 3rd Function Maximum Pressure @ 70 L/min | 20680.0 kPa |
| Implement System Pump Type | Piston |
| Brakes | Brakes meet ISO 3450 |
| Choices | Choices include: 23.5-25 16PR, L3 (Triangle); 23.5R25 ??, L3 (Triangle); 23.5R25 ?, L3 (Bridgestone) |
| ROPS/FOPS | ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards |
| Cooling System | 48.0 l |
| Crankcase | 20.0 l |
| Differential - Final Drives - Front | 40.0 l |
| Differential - Final Drives - Rear | 38.0 l |
| Fuel Tank Size | 290.0 l |
| Hydraulic Tank | 120.0 l |
| Transmission | 45.0 l |
| B-Pin Height | 4188.0 mm |
| B-Pin Height - Carry | 655.0 mm |
| Centerline of Rear Axle to Edge of Counterweight | 2001.0 mm |
| Lift Arm Clearance | 3649.0 mm |
| Height - Top of ROPS | 3458.0 mm |
| Height - Top of Exhaust Pipe | 3596.0 mm |
| Height - Top of Hood | 2568.0 mm |
| Ground Clearance | 460.0 mm |
| Wheel Base | 3300.0 mm |
| Centerline of Rear Axle to Hitch | 1650.0 mm |
| Rack Back - Maximum Lift | 60.0 ° |
| Dump Angle at Maximum Lift | 52.0 ° |
| Rack Back - Carry | 45.0 ° |
| Rack Back - Ground | 40.0 ° |
| Height - Center Line of Axle | 750.0 mm |
| Turning Radius - Inside of Tires | 3419.0 mm |
| Turning Radius - Outside Edge of Counterweight | 6190.0 mm |
| Turning Radius - Outside of Tires | 6164.0 mm |
| Width - Over Tires | 2745.0 mm |
Product Categories : Cat Wheel Loader > Cat 950GC Wheel Loader
